How To Take Apart Galaxy Note 4 In 10 Steps

Everyone can Use Coupon Code(ETS3D7DK) for orders over $50 to buy brand new original cellphone replacement parts at www.etradesupply.com

A few days ago, we tore down the Galaxy Note Edge to see what is different in this curved display device. Especially since the Note 4 and Note Edge showed up at roughly the same time, moreover, they share similar designs and specs. Today, we take apart the Galaxy Note 4 and have a look.

Tools Needed:

1. Hairdryer/Heat Gun;

2. Phillips Screwdriver;

3. Case Opening Tool;

4. Tweezers.

1. Remove the Galaxy Note 4 Battery Door.

● Power off the device;

● Pull out the S Pen stylus;

● Pull the battery door out through the small gap between the power button and the battery door.

2. Remove the Galaxy Note 4 Battery.

3. Remove the Galaxy Note 4 Rear Housing.

● Undo the 16 screws in the rear housing;

● Insert the case opening tool to take off the rear housing.

(Notice: The loudspeaker assembly is located in the rear housing and difficult to remove.)

4. Remove the Galaxy Note 4 Rear Housing Small Parts.

● Remove the Earphone Jack.

● Remove the Power Button and Volume Button.

(Notice: The loudspeaker assembly is located in the rear housing and difficult to remove.)

5. Remove the Galaxy Note 4 Motherboard.

● Pry up the 4 connectors;

● Undo the screw;

● Remove the upper portion of main board and pry up the connector.

6. Remove the Galaxy Note Cameras.

● Pry up the front facing camera connector;

● Pry up the front camera retaining bracket;

● Pry up the connector to remove the back facing camera.

7 Remove the Galaxy Note 4 Small Parts.

● Remove the vibrating motor with power button flex;

● Remove the ear speaker with flex;

● Remove the volume button flex;

● Remove the 5 antenna chips.

(Notice: The 5 signal chips are different in shape, be careful not to place them in the wrong position when reassembling.)

8. Remove the Galaxy Note 4 Charging Port Assembly.

● Pry up the 2 connectors;

● Undo the screw;

● Pry up the charging port assembly and then pry up the two connectors.

9. Remove the Galaxy Note 4 Middle Plate.

● Heat up the LCD and Digitizer assembly for 2 minutes to soften the adhesive;

● Insert the case opening tool to remove the middle plate.

10. Remove the Galaxy Note 4 Middle Plate Small Parts.

● Remove the Ear Speaker Mesh Cover;

● Pry up the connector and pull out the home button flex ribbon.

   

The Galaxy Note 4 disassembly is now completed.