Samsung Galaxy S6 Disassembly/Tear Down/ Take Apart

           


Everyone can Use Coupon Code(ETSASS0PI) for orders to buy brand new original cellphone replacement parts at www.etradesupply.com

          

How to change your Galaxy S6 and Galaxy S6 Edge battery in 5 Steps

Everyone can Use Coupon Code(ETSASS0PI) for orders to buy brand new original cellphone replacement parts at www.etradesupply.com.

Since Samsung has made the Galaxy S6 and S6 Edge with a non-removable battery, and with the battery capacity of these two batteries only being 2550 mAh and 2600 mAh, many people are wondering whether it’s possible/how hard it is to replace the S6 and S6 Edge’s battery? Samsung has released official battery change instructions within their manual (Check it here), but this doesn’t really give you an idea of how difficult the task is. Here our detailed guide will walk you step-by-step through how to replace the S6 and S6 Edge battery. Want to change the battery? Check our guide out first!

To replace the Samsung Galaxy S6 battery:

Tools you need:

Ejector Pin X 1

Heat Gun/Hair Dryer X 1

Metal Spudger Tool X 1 (to pry up the battery)

Phillips Screw Driver X 1 (PH00 1.5)

Plastic Pry Tool X 1

Suction Cup X 1

Step 1:

Shut down your S6 first before you do anything else, then use the Ejector Pin to take out the SIM card and SIM card tray.

Step 2:

Use the Heat Gun/Hair Dryer to heat up one end of the S6 for about 1~2 mins (we start from the bottom), then use the Suction cup to pry up the battery door a little bit and insert the Plastic Pry Tool (or playing cards) in. Take your time during this step, the battery door is adhered to the frame with some very strong adhesive; if it’s too hard to pry up the battery door, try to use more heat, not strength; use a thin plastic pry tool instead of razor blade in order to avoid damaging the glass. After the Plastic Pry Tool has been inserted in, heat up the edges and then gently slide it around the edge to open the battery door.

Step 3:

Undo the 13 screws around the middle plate, then heat up the front of the S6 to loosen the adhesive around the middle plate. Pry up the screen assembly a little bit with the help of a Suction Cup and thin Plastic Pry Tool, then slide the tool to separate the screen assembly (a little strength can be applied to the back of the battery, but not too much, handle carefully and gently)

Step 4:

Disconnect the 6 connectors that hold the motherboard as showed in the picture to release it.

Step 5:

Use the Metal Spudger tool and insert it into the gap between the battery and screen assembly, very very carefully to pry it up because the battery is adhered to the fragile AMOLED display directly! (Do not heat up the battery! Do not bend the battery too much! Be patient!)

After these steps, you could replace the old batter with a new one, and reassemble the Samsung Galaxy S6.

Want to replace the screen of Samsung Galaxy S6, check our tutorial here!

---

 

To replace the Samsung Galaxy S6 Edge's battery 

These two device share the same structure so the steps are nearly the same

Tools you need:

Ejector Pin X 1

Heat Gun/Hair Dryer X 1

Phillips Screw Driver X 1 (PH00 1.5)

Plastic Pry Tool X 1

Suction Cup X 1

Step 1:

Power off the phone then remove the SIM card tray and SIM card.(Photos via ifixit)

Step 2: 

Use the Heat Gun/Hair Dryer to heat up one edge of the S6 Edge, and apply the Suction Cup to pull up the glass a little bit, then insert the thin Case Open Tool to open the battery door.(Photos via ifixit)

     

Step 3: 

Undo the screws around the middle plate, unlike the S6, there’s no adhesive in between the middle plate and the screen assembly, what you need to do is just to pop it up with the help of a Suction Cup and a Case Open Tool.(Photos via ifixit)

Step 4:

Pop up all the connectors to release the motherboard.(Photos via ifixit)

Step 5:

Use the Case Opening Tool to pry up the battery (the battery is also adhered to the AMOLED screen, so watch out!)

 

(Photos via ifixit)

After these 5 steps, you can install the new battery in then reassemble all the other parts.

Replacing the Samsung Galaxy S6 and S6 edge battery is not an easy job, we strongly do not recommend people who have no/less experience attempting this.

Rainbow Marks on Your iPad Screen?

Everyone can use only once this coupon code: ETSASS0PI for extra discounts on http://www.etradesupply.com  on order.

Recently some repair shop owners have been telling us that they have received iPad Mini digitizer touch screenparts with rainbow marks on the screen from other suppliers, and for them it wastes a lot of time to return these parts for a replacement or refund. They want to know why the parts are like this, because the parts have been tested work fine except for the rainbow effect. What's more, as far as they can tell the parts are as good as OEM ones from the materials to the assembly. Well, we looked into this issue, and have found the cause to be the adhesive in the screen.

As far as we know, this rainbow effect issue occurs on the iPad Mini and iPad Mini 2 digitizer touch screen. In this post we'll look at the different types of iPad mini digitizers and which ones have this issue (the cause is the same in the iPad mini 2).

1.        OEM parts: OEM iPad Mini digitizer touch screens are 100% original manufactured and assembled. The Gorilla Glass lens and the special plastic material digitizer are assembled with original OCA.
   
   

2.       Half OEM parts: these parts are original manufactured, but the parts are assembled by other factories using cheap LOCA.

3.       High copy parts: these parts, namely, are made with different and cheaper materials, and are obviously assembled with cheap LOCA. The different parts may look the same, but high copy ones are easily damaged or don’t work stably all the time.

 

Let's get back to the main issue. Generally speaking, the rainbow effect problem occurs on so-called “Half OEM parts”. When light goes through the glass lens and digitizer film, it is refracted by the different material. That's why the rainbow effect is visible on the iPad Mini screen.

OEM iPad Mini digitizer touch screen use original OCA, and the advanced manufacturing process helps to avoid this problem. Meanwhile, the high copy parts are made of the same cheap glass material. So, the refraction of light is less likely to be influenced by the LOCA because it's so thin between the two layers.

If you have any questions about cellphone parts or cellphone issues, just comment below or feel free to contact us directly. We are glad to help you to fix it! 

Samsung Galaxy S6 Disassembly/Tear Down/ Take Apart

Samsung Galaxy S6 Disassembly/Tear Down/ Take Apart

Everyone can use only once this coupon code: ETSASS0PI for extra discounts on http://www.etradesupply.com  on order.

Samsung Galaxy S6 Reassembly

Everyone can use only once this coupon code: ETSASS0PI for extra discounts on http://www.etradesupply.com  on order 

As we have torn down Samsung Galaxy S6, now we show you how to reassemble the gadget back step by step.

Tools Needed:

A Pair of Tweezers

PH00 Philips Screwdriver

  

1.         Insert The Home button with flex cable.

a)         Slide the flex cable through the slot to the back

b)         Press down the home button and make sure it is secure.

2.         Get the USB port back in.

a)         Attach the soft key LEDs to place.

b)         Make sure all the parts are aligned.

3.         Stick the LCM back into place.

a)         Make sure the connector goes back through its slot

b)         Squeeze the parts and Make sure they are aligned correctly.

4.         Fasten 1 Screw to secure the earphone jack. (You can find out the screw easily because it's different from other screws)

     

5.         Place the vibrate motor, ear speaker and proximate sensor into the slot respectively.

a)         Make sure the proximate sensor is facing the right way.

6.         Get the rear facing camera into the mainboard.

     

7.         Connect the charging port assembly to the mainboard.

     

8.         Put the mainboard back into the place.

a)         Make sure not to get any flex cable connectors caught behind it.

9.         Set the front facing camera back into place.

a)         Connect flex cables to the mainboard.

10.     Connect the WiFi and Bluetooth antennas to the mainboard.

a)         Make sure you set them back into the slot so that they fit better

11.     Put the battery in and connect its flex cable to the mainboard.

      

12.     Put the side keys to the slot. (They are the same side keys)

a)         Put the flex ribbon over top of them and press them all into place.

13.   Put the wireless coil in place properly. (Handle carefully for the fragile coil.

14.     Put the middle plate and front assembly back together.

            

15.     Fasten 13 screws in the rear housing.

            

16.     Put the battery door back.

            

17.     Insert the SIM card tray.

           

The Samsung Galaxy S6 reassembly is completed. Anyways, if you still have questions, you can watch our Galaxy S6 reassembly video , or just comment below to let us know. We will reply to you as soon as possible.